Emu poltrona Terra

Terra is a folding armchair with generous dimensions, light and robust, functional and welcoming, to which it is possible to combine the footrest of the same design.
With an elegant and versatile design, it adapts to any indoor and outdoor environment, fitting perfectly into any type of furniture.
Its structure is entirely made of aluminium, to guarantee resistance but also lightness and ease of movement: foldable and easy to store, reliable and spacious when open. The seat is made of EMU-tex fabric, while the backrest is in eco-leather, both resistant to external agents and easy to clean.
For maximum comfort, the seat cushion with polyurethane foam padding, waterproof internal lining and covering suitable for outdoor use in numerous colorful and elegant finishes.

Info & Materials

• Dimensions open: H79 x 77 x 64 cm;
  Dimensions closed: H119 x 22 x 64 cm;
  Seat H: 40 cm without cushion, 45 cm with cushion.
  Weight: 9.5 kg
  Aluminium structure
  Seat in Emu-tex fabric
  Backrest in Eco-Leather
  Structure/Backrest/Seat color combination:
  -White/White /White-Grey
  -Black/Black/Stone
  -Grey-Green/Green/Stone
  -Indian Brown/Brown/Moka

PLUS

• Exclusive and characteristic design.
• Backrest in eco-leather which gives a high level of the product.
• Extreme lightness and easy handling.
• Robustness of the structure due to use of high thickness profiles and extrusions.
• Generous dimensions, a real lounge, a highly comfortable armchair.
• Foldable products, easily transportable and can be easily stored when not in use,
/>taking up little space in the storage environment.
• Suitable for marine contexts and for use on boats.
• Cushions with shaped padding, lower on the rear side guarantees comfort and supports a
relaxation use. The cushions are equipped with attachment systems using cords matching the chosen structure (and
packaged together with the seat) which allow the cushion to remain connected to the seat when it is
closed, facilitating and simplifying the assembly phase. storage.
• The cushions on the lower side are equipped with non-slip, are removable covers and will be available in all fabrics.
• Rivets and screws in 316 stainless steel suitable for marine use.
• The The seat cover can be easily replaced by removing the head covers of the aluminum profiles.
The backrest can also be easily removed by removing the stainless steel fastening visible from behind.
The backrest and seat covers will be available as replacement accessories.

Maintenance

ALUMINIUM: To keep the product in good condition for a long time, we recommend correct periodic cleaning, particularly frequent in locations characterized by high humidity and a marine climate. It is recommended to clean the surfaces with a soft cloth using water or neutral detergents. Prolonged and uninterrupted exposure to intense UV radiation or very cold temperatures can affect the initial characteristics of the colored aesthetic covering made of polyester. We recommend cleaning and storing the products in sheltered places during periods of prolonged disuse and in winter.
EMU-Tex: Avoid prolonged contact with greasy and/or coloring substances which could be absorbed by the covering material and give rise to permanent stains, as well as deteriorating the structure of the yarn. Frequent washing: use water and non-abrasive liquid detergents with neutral PH and colorless. If necessary, leave the detergent to act for a few minutes. Rinse thoroughly with water at a temperature not higher than 30°C. If using pressure devices, keep the tip of the diffuser at a distance of at least 60/70 cm from the surface of the product. If necessary repeat the operation. Periodic and/or extraordinary washing: use a regenerating stain remover for PVC, according to the following procedure.
Operations to be carried out:
- apply the stain remover to the dirty sheet;
- let the product act for 15 -30 minutes;
- rub the stained areas with a common hard-bristled laundry brush (this phase is necessary since the dirt is inside the texture);
- rinse with running water (if possible rinse with pressure washer maintaining a distance of approximately 60 cm to avoid damaging the sheet with high pressure);
- repeat the operations if necessary.
Note: when applying the product, be careful not to apply it in the painted parts of the product.

CUSHIONS: All fabrics may show slightly different shades as they come from different production batches or have different exposure to light. This aspect should not be considered a defect but a feature of the product. EMU uses the most advanced technologies in the textile sector to create outdoor furniture. The materials are resistant to splashes of water, UV rays, salt and sweat, without losing their structural and comfort characteristics. It is advisable, after the rain, to dry the furnishings with fabrics in order to prevent the formation of damp stains and mould. To improve the longevity of the products, EMU recommends storing them, in the event of prolonged periods of non-use (e.g. autumn/winter) or incessant rain, in a closed, ventilated and dry place, covering them with sheets to keep them at their best and protect them from dust and dirt. Before storing them, make sure they are perfectly dry. The covers/coverings are recommended for outdoor use but for short periods. The covers are not to be considered an alternative to winter storage of the products. In the event of rain, always check that no humidity forms between the lining and the products in order to prevent any mold as, as the fabrics are textile products, the presence of residual humidity is possible and can cause mould. All materials meet the most rigorous quality standards for outdoor use and the fabrics are quick-drying and easy to maintain.
Avoid prolonged contact with greasy and/or dyed substances which could be
absorbed from the covering material and give rise to permanent stains, as well as deteriorating the structure of the yarn. If used near the sea or swimming pools, periodic washing is recommended. Frequent washing: follow the specific instructions for each material shown on the appropriate label. Use water and non-abrasive liquid detergents with neutral PH and colorless. If necessary, leave the detergent to act for a few minutes. Rinse thoroughly with water at a temperature not exceeding 30°C. If using pressure devices, keep the tip of the diffuser at a distance of at least 60/70 cm from the surface of the product. If necessary repeat the operation. Do not use abrasive sponges to remove stains and do not treat with bleach or chlorine.