Emu ombrellone Trevi

The Trevi umbrella by Emu offers a combination of refined design and premium materials. It has an aluminum structure, an acrylic fabric sheet and a wide base that provides the necessary stability (the 8 50 x 50 cm tiles to be inserted into the base are not included). The opening and closing of the umbrella is facilitated by the aid of a gas spring which, by acting on a suitable lever system, reduces the force necessary for the opening and closing manoeuvres. The sizing and levers created allow the umbrella to close easily without the need to move tables, as well as the possibility of rotating it on the horizontal plane by 360°. Trevi is also equipped with an optional lighting system, consisting of 4 LED bars, a remote control and a control unit. The battery-powered remote control is equipped with the following buttons: on, off, three preset light intensities, choice between warm light and cold light (Kelvin degrees).
An alternative ground fixing system is available via a specific kit and optional accessories such as awnings with weight kit and drainage gutters for coupling multiple umbrellas. There are three sizes available for the Trevi umbrella.

Dimensions W/D/H:  303 x 323 x 288 h cm |  403 x 325 x 282 h cm |  353 x 372 x 300 h cm
Weight: 42.5 Kg  |  44.1kg  |  48.1 kg
Pole: 9x13.5 cm
Cover FC/981: Yes
Cover type: FC/981
Base: 929/B8N max 8 tiles - size: L 119 / P 58 / H 19 - Weight: 45kg
Optional accessories: 999 LED BAR KIT_230 volt power supply Dimmable LED light 40 watts (4x10 watts) - 2700/6500 K - 1200 lumen. The kit contains 4 LED bars + 1 remote control + 1 control unit (from 230 volts to 24 volts).

Aluminium pole finish: antique iron - matt white - polished aluminium
Synthetic sheet colour: white - dove grey 
 


Materials

Aluminium_aluminium alloys, particularly suitable for cold working and die casting, appropriately treated to resist atmospheric agents and powder coated.

USE AND MAINTENANCE
To keep the product in good condition for a long time, we recommend correct periodic cleaning, particularly frequent in locations characterized by high humidity and a marine climate. It is recommended to clean the surfaces with a soft cloth using water or neutral detergents. Prolonged and uninterrupted exposure to intense UV radiation or very cold temperatures can affect the initial characteristics of the colored aesthetic covering made of polyester. We recommend cleaning and storing the products in sheltered places during periods of prolonged disuse and in winter.

Acrylic fabric_is a fiber whose basic element is a polymer chain composed of 85% acrylonitrile. The acrylic fiber combines the aesthetic qualities of a luxurious fabric, with a body and touch similar to those of wool, with the functional qualities of resistance to atmospheric agents: it resists UV rays, does not stain and does not rot in water thanks to the speed of drying.

USE AND MAINTENANCE
Avoid prolonged contact with greasy and/or coloring substances which could be absorbed by the covering material and give rise to permanent stains, as well as deteriorating the structure of the yarn. If used near the sea or swimming pools, periodic washing is recommended. Frequent washing: follow the specific instructions for each material shown on the appropriate label. Use water and non-abrasive liquid detergents with neutral PH and colorless. If necessary, leave the detergent to act for a few minutes. Rinse thoroughly with water at a temperature not exceeding 30°C. If using pressure devices, keep the tip of the diffuser at a distance of at least 60/70 cm from the surface of the product. If necessary repeat the operation. Do not use abrasive sponges to remove stains and do not treat with bleach or chlorine.

design: Emu