Armchair in ash covered in fabric
The new Lamorisse Wood 3687 chair is the wooden version of the already established and elegant Lamorisse in aluminium, designed for the outdoors: the stylistic similarity allows you to furnish, especially in contract environments, the internal spaces in continuity with the external ones, focusing on the warmth of wood and the fine finish of the fabrics that cover the cushions.
The ash structure, steam bent to form the enveloping round section armrests, continues smoothly into the solid oval section legs. The seat cushion is supported by a metal structure with elastic straps, which guarantee the non-deformability and comfort of a chair built to last. The back cushion, joined to the other by a zip, is large and enveloping whilst retaining a graceful line, embellished by the detail of the leather strap that secures it to the structure. The "wings" of the cushion that adhere to the armrests convey the idea of lightness and liveliness, like an inflated and soft colored balloon linked to the thin thread-like structure, in homage to the red balloon created by the French director Albert Lamorisse.
Lamorisse Wood it is solid, light and the cushions have completely removable covers and are made of fireproof fabric; its perfect balance between elegance and practicality earned it the HiP 2023 award for the "Hospitality seating" category, which recognized its versatility but above all its strong vocation for furnishing hospitality facilities. p>
Fabrics:
Svensson Semi C110÷C122
Composition: 85% Wool, 15% Polyamide
Weight: 330 g/m2 (9.73 oz/yd2 )
Abrasion: 100,000 cycles Martindale
Fireproof
Ecolabel
Suitable for maritime decor
Dry clean only
Do not bleach
No dryer
Iron at medium temperature
Kvadrat Relate C210÷C217
Composition: 100% TREVIRA CS®
Weight: 320 g/m2 (9.47 oz/yd2)
Abrasion: 80,000 cycles Martindale
Fireproof
Wash at 60° C
Dry clean
Do not bleach
No dryer
Iron at medium temperature
Wool-acrylic D120÷D123
Composition: 22% Acrylic 22% Virgin Wool 22% Polyester 14% Viscose 13% Cotton, 7% Linen
Weight: 580 g/m2 (17.11 oz/yd2)
Abrasion: 30,000 cycles Martindale
Fireproof
Dry clean only
Do not bleach
Dry low heat
Iron at low temperature
Hero G169
Composition: 97% New wool, 3% Recycled nylon
Weight: 415 g/m2 (12.21 oz/yd2)
Abrasion: 45,000 cycles
Hero Heather G255÷G258
Composition 97% New wool, 3% Recycled nylon
Weight: 400 g/m2 (11.80 oz/yd2)
Abrasion: 45,000 cycles
Divina Melange G21÷G24
Composition: 100% New wool
Weight: 560 g/m2 (16.52 oz/yd2)
Abrasion: 45,000 cycles
Fireproof
Ecolabel
GreenGuard
Suitable for maritime decor
Dry clean only
Do not bleach
No dryer
Iron at medium temperature
Molly G120÷G122
Composition: 100% New wool
Weight: 493 g/m2 (14.54 oz/yd2)
Abrasion: 75,000 cycles Martindale
Ecolabel
GreenGuard
Suitable for maritime decor
Dry clean only
Do not bleach
No dryer
Iron at medium temperature
Wool-polyamide G130÷G133
Composition: 95% Virgin Wool 5% Polyamide
Weight: 660 g/m2 (19.47 oz/yd2)
Abrasion: 52,000 cycles Martindale
Suitable for maritime decor
Dry clean only
Iron at low temperature
Kvadrat Remix H120÷H127
Composition: 90% New Wool 10% Nylon
Weight: 300 g/m2 (8.85 oz/yd2)
Abrasion: 100,000 cycles Martindale
Fireproof
Wash at 60° C
Dry clean
Do not bleach
No dryer
Iron at medium temperature
Dedar A perfect flower N30÷N38
Composition: 65% Wool 32% Cotton 3% Polyamide
Weight: 746 g/m2 (22.00 oz/yd2)
Abrasion: 80,000 cycles Martindale
Fireproof
Dry clean only
Do not bleach
No dryer
Iron at low temperature
Maintenance of materials:
Wood: Clean using a microfibre cloth moistened with water and neutral detergent. Always dry after cleaning. Do not use detergents and solvents, products based on denatured alcohol and ammonia, and products with a strong acid or very alkaline content. Promptly remove any liquid substances or other residues to avoid absorption and permanent stains.
Fabrics: Regular cleaning of fabrics is recommended to maintain the appearance of textile coverings and prolong their life. Dust and dirt wear the fabric, therefore periodic cleaning with a vacuum cleaner (with less intense suction) is recommended. It is essential to act quickly on stains, liquids must be absorbed with a white absorbent cloth. Non-greasy stains can be removed by gently dabbing with a damp sponge or a white lint-free cloth. Evaluate the effectiveness of detergents on small, hidden parts. Do not use abrasive products, concentrates, solvents or bleaches. Please note that these suggestions are only recommendations and do not guarantee complete stain removal. Always refer to the technical and maintenance specifications listed on each specific data sheet and to the information on any labels.