Pedrali sedia Lamorisse 3684

The Lamorisse 3684 chair is designed for the outdoors, to furnish any outdoor relaxation space with elegance and comfort. The contrast between the very light aluminum structure and the welcoming and opulent cushion is inspired by the red balloon created by the French director Albert Lamorisse, from which the chair takes its name. The CMP team of designers has also developed an indoor wooden version: the stylistic similarity allows it to be possible to furnish, especially in contract environments, the internal spaces in continuity with the external ones, with the same characteristics of elegance and practicality.
The aluminium structure which curves to form the enveloping round section armrests, continues smoothly into the solid oval section legs, with greater thickness only where needed, at the contact points . The seat cushion is supported by elastic straps, which guarantee the maximum comfort of a chair built to last. The back cushion, joined to the other by a zip, is large and enveloping while retaining a graceful line, and both are easily removable for maintenance, storage or possible replacement.
Lamorisse 3684 is stackable, light and the cushions are completely removable and resistant to external agents; its perfect balance between elegance and practicality make it a versatile and perfect chair especially for hospitality facilities, awarded with the Big See product design award 2023.

Info & Materials

• Dimensions cm: L 65 x D 59 x H 79, H armrest 63, H seat 52
  Weight: 6.2 kg
  Stackable up to 6 chairs
  Extruded aluminum frame welded, with elastic straps
  Powder coated frame
  Foot in technopolymer, black or white
  Cushions with removable covers, molded with flexible polyurethane foam (density 65 kg/m³), with water-repellent lining and covered in fabric:

Florida D80÷D89

Composition: 100% Acrylic

Weight: 290 g/m2 (8.55 oz/yd2)

Abrasion: > 20,000 cycles, Martindale

Suitable for outdoor use

Water repellent

Approved for maritime environments

Gentle wash at 30° C

Do not dry clean

Do not bleach

No dryer

Do not iron

Polypropylene D130÷D133

Composition: 100% Polypropylene

Weight: 470 g/m2 (13.86 oz/yd2)

Abrasion: 40,000 cycles, Martindale

Suitable for outdoor use

Water repellent

Wash at 40°C

Do not dry clean

Do not bleach

Low temperature dryer

Iron at low temperature

Polypropylene D140÷D144

Composition: 100% Polypropylene

Weight: 520 g/m2 (15.34 oz/yd2)

Abrasion: 62,000 cycles, Martindale

Suitable for outdoor use

Water repellent

Wash at 30° C

Do not dry clean

Do not bleach

No dryer

Do not iron

Brezza D22÷D26

Composition: 100% Polypropylene

Weight: 614 g/m2 (18.11 oz/yd2)

Abrasion: > 30,000 cycles, Martindale

Resistant to external agents

Water repellent

Wash at 30° C

Do not dry clean

Do not bleach

No dryer

Do not iron

Sand D110÷D115

Composition: 88% Polypropylene 12% Polyester

Weight: 470 g/m2 (13.86 oz/yd2)

Abrasion: 30,000 cycles, Martindale

Suitable for outdoor use

Water repellent

Wash at 40°C

Do not dry clean

Do not bleach

Low temperature dryer

Iron at low temperature

Zefiro D100÷D105

Composition: 100% Polypropylene

Weight: 430 g/m2 (12.68 oz/yd2)

Abrasion: 50,000 cycles, Martindale

Suitable for outdoor use

Water repellent

Wash at 40°C

Do not dry clean

Do not bleach

No dryer

Iron at low temperature

Maintenance:
Aluminium: Clean using a microfibre cloth soaked in neutral soap, household degreaser . Always rinse with water and dry after cleaning. Do not use granular detergents, solvents in general and concentrated, acidic or alkaline products.
Fabrics: Regular cleaning of fabrics is recommended to maintain the appearance of textile coverings and prolong their life. Dust and dirt wear the fabric, therefore periodic cleaning with a vacuum cleaner (with less intense suction) is recommended. It is essential to act quickly on stains, liquids must be absorbed with a white absorbent cloth. Non-greasy stains can be removed by gently dabbing with a damp sponge or a white lint-free cloth. Evaluate the effectiveness of detergents on small, hidden parts. Do not use abrasive products, concentrates, solvents or bleaches. Please note that these suggestions are only recommendations and do not guarantee complete stain removal. Always refer to the technical and maintenance specifications listed on each specific data sheet and to the information on any labels.

Design: CMP Design