Modular outdoor sofa
Contact us for your customized configuration
To expand the collection that is the protagonist of the outdoor space, Pedrali creates the Nolita modular sofa. Inspired by Mario Pedrali's first creations, this sofa retains a sense of transparency and lightness typical of his collection, with the steel rod structure that gives rhythm and balance to each piece.
Its versatility is extraordinary: it is possible to combine different modules to create personalized compositions and adapt it to every furnishing and style need. With removable cushions with a practical and elegant covering, it is perfect for outdoor spaces, guaranteeing not only comfort but also ease of maintenance.
Steel frame, Ø20mm tube structure and Ø8 mm rods, electrogalvanized, powder coated
Seat cushion, padded with expanded polyurethane (density 30 kg/m³), fireproof (class 1 IM, Crib 5) with waterproof lining for outdoor use and covered in fabric
Backrest and armrest cushions, padded with frayed polyester fiber with waterproof lining for outdoor use and covered in fabric
Feet in white or black technopolymer
Module connection hooks included
Suitable for outdoor use
Protective cover available on request
Contact us for a customized configuration with different modular combinations, even with additional cushions.
Fabrics:
Florida D80÷D89
Composition: 100% Acrylic
Weight: 290 g/m2 (8.55 oz /yd2)
Abrasion: > 20,000 cycles, Martindale
Suitable for outdoor use
Water-repellent
Approved for maritime environments
Gentle wash at 30° C
Do not dry clean
Do not bleach
No dryer
Do not iron
D130÷D133 span>
Composition: 100% Polypropylene
Weight: 470 g/m2 (13.86 oz/yd2)
Abrasion: 40,000 cycles, Martindale
Suitable for outdoor use
Water-repellent
Wash at 40° C
Do not dry clean
Do not bleach
Dry low heat
Iron low heat
D140÷D144 span>
Composition: 100% Polypropylene
Weight: 520 g/m2 (15.34 oz/yd2)
Abrasion: 62,000 cycles, Martindale
Suitable for outdoor use
Water-repellent
Wash at 30° C
Do not dry clean
Do not bleach
No dryer
Do not iron
Brezza D22÷D26
Composition: 100% Polypropylene
Weight: 614 g/m2 (18.11 oz/yd2)
Abrasion: > 30,000 cycles, Martindale
Resistant to external agents
Water-repellent
Wash at 30° C
Do not dry clean
Do not bleach
No dryer
Do not iron
Sand D110÷D115
Composition: 88% Polypropylene 12% Polyester
Weight: 470 g/m2 (13.86 oz/yd2)
Abrasion: 30,000 cycles, Martindale
Suitable for outdoor use
Water-repellent
Wash at 40° C
Do not dry clean
Do not bleach
Dry low heat
Iron low heat
Zefiro D100÷D105
Composition: 100% Polypropylene
Weight: 430 g/m2 (12.68 oz/yd2)
Abrasion: 50,000 cycles, Martindale
Suitable for outdoor use
Water-repellent
Wash at 40° C
Do not dry clean
Do not bleach
No dryer
Iron at low temperature
Maintenance
Steel: Clean using a microfibre cloth soaked in neutral soap, household degreaser, alcohol and specific detergents for metals. Always rinse with water and dry after each cleaning. Do not use abrasive, granular detergents and solvents in general.
Fabric: Regular cleaning is recommended on fabrics to maintain the appearance of textile coverings and prolong their life. Dust and dirt wear the fabric, therefore periodic cleaning with a vacuum cleaner (with less intense suction) is recommended. It is essential to act quickly on stains, liquids must be absorbed with a white absorbent cloth. Non-greasy stains can be removed by gently dabbing with a damp sponge or a white lint-free cloth. Evaluate the effectiveness of detergents on small, hidden parts. Do not use abrasive products, concentrates, solvents or bleaches. Please note that these suggestions are only recommendations and do not guarantee complete stain removal. Always refer to the technical and maintenance specifications listed on each specific data sheet and to the information on any labels.
Design: CMP Design