Doimo pouf Sassi

The Sassi pouf by Doimo is a furnishing accessory that combines playful design and functionality. Its soft shapes, inspired by natural pebbles, can be transformed into fun seats or footstools, adding a touch of originality to any environment. Available in three different shapes, each is embellished with a distinctive contrasting anthracite-coloured finish that enhances the silhouette.
The upholstery is made of high-quality technical materials, designed to offer excellent resistance to compression, thus guaranteeing a comfortable and load-bearing seat. The Sassi pouf can be upholstered in a wide range of plain, velvet or nubuck-effect fabrics, or leather, all of which can be completely removed for easy maintenance and customisation.
With the Sassi pouf, your living area acquires a versatile and stylish element, perfect for adding comfort and personality to your space.

Info & Materials
Dimensions and weight
cm 70 x 70, h 35, kg 3,5
cm 84 x 74, h 35, kg 3,5
cm 93 x 81, h 35, kg 4
Filling made of a mix of polystyrene beads and latex chips covered with polycotton fabric.
Upper seam always finished with an anthracite-coloured canneté.
Completely removable cover in fabric or leather.

Upholstery:
CATIA: 100% PL, Weight per mtl: plain 525 gr., melange: 560 gr., velvet: 600 gr., wool effect: 380 gr. Martindale: plain ‘ 60,000 turns, melange: 35,000 turns, velvet: 100,000 turns, wool effect: 100,000 turns. Height: cm 140.
Fabric machine washable at 30°, do not dry clean, do not bleach, do not tumble dry, iron at low temperature.

DALILA: 100% PL, Weight per mtl: Melange: 295 gr, Velvet: 602 gr. Martindale: Melange: 60,000 g, Velvet: 100,000 g. Height: cm. 140
Melange and Velvet Water-repellent fabric washable in water at 30°, dry cleanable, do not bleach, do not tumble dry, iron at low temperature.

ERIKA: 50% PU - 45% PL - 5% CO, Weight per mtl: 770 g. Martindale: 30,000 rpm. Height: cm 140
Nubuck effect fabric, Water repellent washable in water at 30°, do not spin, do not dry clean, do not bleach, do not tumble dry, iron at low temperature.

SELENE LEATHER: Raw material origin: Non-European cowhide. Tanning: Chrome. Dyeing: Water-based with azo dyes. Thickness: 1.6/1.8 mm. Type: Printed half-grain. Finishing: Water-based pigments.

FABRIC MAINTENANCE
A brush can be used for routine cleaning, provided it is soft.
Dirt and stains can be removed with neutral soap and water-based detergents, using a soft synthetic sponge.
Brush periodically. In the case of stains, simply remove them with a dry cloth or absorbent kitchen paper. If the stain penetrates, rub lightly with a damp, non-abrasive sponge and if necessary use a small amount of mild soap, then rinse with a clean sponge. The fabrics can be washed in water at 30° with a low spin cycle (do not spin Erika fabrics). For washing, we recommend using a very small
amount of neutral detergent, avoiding any other additives. Shrinkage in the range of 1-2% is normal. The fabric should not be exposed to strong sources of light, especially if filtered by glass and heat sources above 50°. Attention, before washing it is advisable to apply a counter-velcro to protect the fabric.

LEATHER MAINTENANCE
The special processing and treatment of Selene leathers make them particularly resistant to light and wear. They are pleasantly soft to the touch, characterised by the Titanic print that covers the surface evenly. The quality of the leathers is due to the careful selection of the raw hides and increased attention in all processing steps. Irregularities in the surface such as wrinkles, streaks, grain or colour differences are not defects but evidence of a natural animal life, thus embellishing each piece and making it unique and different from any other. For these reasons, it is not possible to guarantee the same colour shade from one batch to the next.
A special leather cleaning and maintenance kit is available. Dirt and stains can be removed using a soft pad soaked in water and mild soap, wiped carefully. Rub lightly because excess pressure, instead of helping to clean, causes solubilised dirt to penetrate the leather. Never use common detergents or various cleaning preparations. Do not treat the leather with oils of any kind. It is very important not to expose leather articles to direct sunlight, halogen lamps or heat sources. Do not leave newspapers in contact with the leather. Newspaper ink may be absorbed. Also avoid wearing clothes that can lose colour, such as jeans, which can be absorbed by the leather. Avoid excessive hard rubbing, both on the leather and on the stitching thread. 

Contact us to find out about all available covers and for the additional covers.